1/2" Drive Half Size Flip Impact Sockets
- These sockets are double sided and designed to be used on Ford, Range Rover and Jaguar chrome plated wheel nuts.
- Sockets require a min 75mm (3") extension bar (E012075) fitted to operate
- Manufactured using CR-MO steel with a phosphate finish for corrosion protection
- Sockets are neutral branded and size stamped for lifetime size identification
| Part No | Size (mm) | L (mm) | D1 (mm) | D2 (mm) |
|---|---|---|---|---|
| FS185195 | 18.5 - 19.5 | 76 | 26 | 28 |
| FS215225 | 21.5 - 22.5 | 76 | 30 | 32 |
| FSSET03 | Set of 2 sockets and extension bar | Presented in blow moulded case |
1/2" Drive Special Alloy Wheel Impact Sockets
- These sockets have a special nut profile for specific manufacturers vehicles
- Manufactured using CR-MO steel with a nylon sleeve and insert to protect alloy wheel and nut
- Sockets are neutral branded and size stamped for lifetime size identification
| Part No | Size (mm) | L (mm) | D1 (mm) | D2 (mm) | Vehicle |
|---|---|---|---|---|---|
| MSP01217 | 17 | 84.5 | 27 | 30 | Mercedes Maybach |
| KSP01221 | 21 | 84.5 | 31 | 30 | Kia/Hyundai |
1" Drive Disc-Lock (Thin Wall) Impact sockets
- These sockets are designed with a non-chamferred face to provide a positive connection to commercial disc-lock nuts
- Manufactured using CR-MO steel with a phosphate finish for corrosion protection
- Sockets are neutral branded and size stamped for lifetime size identification
| Part No | Size (mm) | L (mm) | D1 (mm) | D2 (mm) |
|---|---|---|---|---|
| DLK10034 | 34 | 90 | 54 | 54 |
| DLK10038 | 38 | 90 | 58 | 54 |
1" Drive Budd (Square) Impact Sockets
- Manufactured using CR-MO steel with a phosphate finish for corrosion protection
- Sockets are neutral branded and size stamped for lifetime size identification
| Part No | Size | L (mm) | D1 (mm) | D2 (mm) |
|---|---|---|---|---|
| BW10017 | 17mm | 76 | 40 | 54 |
| BW10019 | 19mm | 76 | 42 | 54 |
| BW10021 | 21mm | 76 | 44 | 54 |
| BW10022 | 22mm | 76 | 44 | 54 |
| BW10013/16 | 13/16 | 76 | 44 | 54 |
1" Drive Dual Budd Impact sockets
- Manufactured using CR-MO steel with a phosphate finish for corrosion protection
- Sockets are neutral branded and size stamped for lifetime size identification
| Part No | Size | L (mm) | D1 (mm) | D2 (mm) |
|---|---|---|---|---|
| DB1004121 | 41 x21mm | 96 | 58 | 58 |